Search for:

Panther Display increases the degree of automation in the plant

The digital cutter offers a working area of 1800 x 3200 mm and plots with two instruments in parallel, a so-called double bar system. Depending on the sheet format, these beams work on one or more sheets at the same time. Up to three different creasing, cutting or drawing instruments can be mounted on each unit. The instruments work with an acceleration of max. 9.3 m/second.

Material transport is fully automated with a board handling system, which uses an innovative conveyor belt to unload and stack the cut material. This means that holding webs for fixing the cut parts are superfluous and the effort involved in separating out the cut parts is minimized. The stacking height of 1.5 m allows long, uninterrupted production cycles. The machine operating time is very short, as manual intervention is limited to moving the raw material pallet into the loading unit and then removing it from the unloading unit.

The loading unit can load the cutter with several sheets. Due to the full utilization of the work surface, even small sheet formats can be efficiently processed.

The combination of fully automatic material handling and powerful digital cutting is the key to flexible production. During the loading process, a scanner captures the order information via QR codes that are also printed. This allows different orders within a batch to be reliably recognized and processed automatically. With the board handling system, materials up to a thickness of 110 mm can be processed efficiently.

With the investment in the supplementary plotter technology, Panther Display is taking the path to even more independence in demanding, individual display developments and thus also ensures the adherence to delivery dates and delivery security that customers can expect.

Go back